美女自卫慰视频福利网站,亚洲欧美日韩国产精品一区二区,亚洲在AV无码天堂,牲交欧美兽交欧美

聯系方式
服務熱線:0531-85980985 

聯系人: 寧經理
手機:13953116782
電話:15990999232
郵箱:499589624@qq.com
地址:濟南清河北路11號

濟南工作服定制之前應了解好這些問題

來源:http://www.ruitao288.cn 日期:2022-05-23 發布人:      

1.工作服定制線
1. Customized work clothes line
線頭干凈,一般的工作服。它們有尾巴,有專門的人剪斷線頭。一般來說,便宜的工作服一般不會。還有一件工作服,如果對質量有要求,線長一般不超過1CM。
The thread end is clean, which is a common brand of work clothes. They have tails and special people cut thread ends. Generally speaking, cheap work clothes will not. There is also a work suit. If there are quality requirements, the line length is generally no more than 1cm.
2、工作服的做工
2. Workmanship of work clothes
看線。主要看工作服的車線是否筆直?是對稱的嗎?針跡長度是細還是密?一般來說,更好有一個密集的針距。沒有對齊。背針:一件工作服開始的時候,一般要來回縫幾針,這樣工作服就不容易打開。都是為了防止他一拉就吹嘴。一般梭織的比較明顯,比如梭織的裙子,你可以看看他在接口處多縫幾針,看看側縫,看看工裝褲。看一些有偏見的地方,普通人不注意看到的地方,“領子”、“袖子、袖口、腋窩等”。
Look at the line. Mainly depends on whether the line of work clothes is straight? Is it symmetrical? Is the stitch length thin or dense? Generally speaking, it is best to have a dense needle pitch. No alignment. Back stitch: at the beginning of a work suit, it is generally necessary to sew several stitches back and forth, so that the work suit is not easy to open. To prevent him from blowing his mouth as soon as he pulls it. Generally, the woven is obvious. For example, for a woven skirt, you can see how many stitches he sews at the joint, the side seam and the overalls. Look at some biased places, where ordinary people don't pay attention, "collar", "sleeve, cuff, armpit, etc.".
3.定制版型工作服
3. Customized work clothes
盤形不對稱,切片不整齊。
The disc shape is asymmetric and the slices are irregular.
4、工作服的線條是否整齊?
4. Are the lines of work clothes neat?
這條線的松緊度在不同的部位有不同的要求,比如肩膀,人體經常活動的部位,稍微松一點就好,在工作服下面,稍微緊一點就好,一般是工作服都是統一的領口。,領口縫線,腋下縫線,接口處是否有回線。
The tightness of this line has different requirements in different parts, such as the shoulder, the part where the human body often moves, just loosen a little, and under the work clothes, just tighten a little. Generally, the work clothes have a unified neckline., Whether there is return line at the neckline suture, underarm suture and interface.

濟南工作服

5.工作服的熨燙
5. Ironing of work clothes
這里注意一下,如果是熱鉆工作服,看鉆頭是否容易脫落,如果是高溫壓力鉆,就不會脫落!熱鉆是否容易脫落。但是,一般的工作服不會使用熱鉆。
Note here that if it's a hot drilling suit, check whether the drill bit is easy to fall off. If it's a high-temperature pressure drill, it won't fall off! Whether the hot drill is easy to fall off. However, ordinary work clothes do not use hot drills.
6、工作服定制規格
6. Customized specifications of work clothes
濟南工作服廠家人員來說一下規格,也就是眾所周知,工作服的尺碼一定要對,不是M,現實中是L,可能會出現亂碼或者錯碼。
Let's talk about the specifications of Jinan overalls manufacturers. As we all know, the size of overalls must be right, not m, but l in reality. There may be random or wrong codes.
7、工作服定制標準化包裝
7. Customized standardized packaging of work clothes
看一件工作服時,先平放,看看會不會有色差,除了,上下工服是否均勻,然后檢查是否有小孔。
When looking at a work suit, first lay it flat to see if there will be color difference. In addition to timing, check whether the upper and lower work clothes are uniform, and then check whether there are small holes.
更多問題信息的了解就來關注我們的網站www.ruitao288.cn,本企業制作定做工作服等服飾多年,資源有保障。
For more information, please visit our website at www.ruitao288.cn COM, our company has specialized in making customized work clothes and other clothes for many years, and the resources are guaranteed.
聯系我們

座機:0531-85980985 

咨詢電話:13953116782

電話:15990999232

郵箱:499589624@qq.com

地址:濟南清河北路11號

關注我們
微信二維碼

微信二維碼

濟南亞美森服飾有限公司 備案號:魯ICP備19008571號-2 網站地圖XML TXT

魯公網安備 37010402000762號