聯系方式
服務熱線：0531-85980985
聯系人： 寧經理 手機：13953116782 電話：15990999232 郵箱：499589624@qq.com 地址：濟南清河北路11號
工作服定制的量體知識有哪些？
來源：http://www.ruitao288.cn 日期：2023-07-11 發布人：
1.總長：代表服裝“號”，由頭部頂端垂直測量腳跟。
1. Total length: represents the clothing size, measured vertically from the top of the head to the heel.
2.衣長：由前身左側脖根位置，軟尺通過胸部豐滿處弧形測量長度，一般要看工作服定制款式特點來定。
2. Length: Measure the length from the left neck base of the front body, using a soft ruler to measure the length through the curved area of the full chest. It usually depends on the customized style characteristics of the work clothes.
3.袖長：由左肩骨外端頂點量手的虎口位置，不宜過短也不宜過長。
3. Sleeve length: Measure from the outer vertex of the left shoulder bone to the mouth of the hand, and should not be too short or too long.
4.肩寬：由左肩骨外端頂點量右肩骨外端頂點，軟尺在后背貼緊后脖根略成弧形。
4. Shoulder width: Measure from the vertex of the outer end of the left shoulder bone to the vertex of the outer end of the right shoulder bone, and place the soft ruler tightly against the back of the neck in a slightly curved shape.
5.胸圍：將皮尺放在胸部更豐滿位置頂點水平環繞一周。
5. Chest circumference: Place the tape measure at the fullest position of the chest and wrap it horizontally around the apex.
6.腰圍：將皮尺放在腰部更細位置水平環繞一周。
6. Waist circumference: Place the tape measure horizontally around the thinnest part of the waist.
7.腰節：一般體型可按總體高度比例算出。遇到特殊體型時，就需要測量這前后腰節尺寸，即將皮尺放在腰部更細處水平環繞一周，自頸圍前后點量到前后腰圍皮尺的中間尺寸，即為前后腰節的尺寸。
7. Waist joint: Generally, the body shape can be calculated in proportion to the overall height. When encountering a special body shape, it is necessary to measure the size of the front and rear lumbar joints. That is, place the tape measure horizontally around the thinnest part of the waist and measure it from the center point of the neck circumference to the middle size of the front and rear lumbar measurement, which is the size of the front and rear lumbar joints.
8.臀圍：將皮尺放在臀部更豐滿位置頂點水平環繞一周。
8. Hip circumference: Place the tape measure at the fullest position of the buttocks and wrap it horizontally around the vertex.
工作服定制測量時，為了保持服裝定做尺寸的準確性，被測量者更好穿簡單或較薄的衣服，抬頭挺胸站直，雙手自然下垂，測量圍度時，皮尺應保持垂直。
When customizing work clothes for measurement, in order to maintain the accuracy of the customized size of the clothing, it is best for the measured person to wear simple or thin clothes, stand straight with their head up and chest straight, and their hands naturally droop. When measuring the circumference, the tape measure should be kept vertical.
上一條：工作服設計定制需要關注的要素 | 下一條：不同職業男裝搭配技巧有哪些？
資訊MORE+
- 哪些行業需要工作服定制 2024-12-23
- 濟南工裝定做需要注意什么？ 2024-12-15
- 在選擇工裝定做工廠時要考慮哪些因素？ 2024-12-18
- 濟南工作服主要在舒適性上 2024-12-09
- 工裝定制的流程，對材質上的要求有哪些？ 2024-12-10
- 工裝定做的客戶需求定做介紹 2024-12-03
- 濟南職業裝可以增加員工歸屬感 2024-12-14
- 工作服定制要選擇的廠家 2024-12-07
- 濟南工作服：工作服是勞保用品的一種 2024-11-23
- 濟南工裝定做：設計口袋時要以什么為主？ 2024-11-21
- 濟南工作服：造成你過敏的源頭可能是你的衣服！ 2024-11-20
- 濟南服裝廠：賣不掉的衣服怎樣處理？ 2024-11-18
- 濟南服裝廠：服裝廠的灰塵對身體有害嗎？ 2024-11-16
- 濟南工作服：工裝定做之此材料辨別 2024-11-13
- 如何選擇適合自己的職業裝 2024-11-12
- 濟南職業裝：定做西裝一般需要多久？ 2024-11-07
- 怎樣選擇的廠家來定做工作服？ 2024-11-06
- 冬季選擇怎樣的勞保工作服 2024-11-06
- 濟南高端工作服定制需要注意的事項 2024-10-31
- 倉庫工作服什么顏色好 2024-10-26
